Misc
Cisco Class-Based QoS (CBQoS) Indexes Do Not Match
If TotalView is monitoring a Cisco router that has Class Based QoS configured, the internal...
Tue, 20 Sep, 2016 at 2:21 PM
SNMP Reliability is the amount of packet loss seen to/from the device when trying to collect information from it. It measures the last poll (last 5 min...
Tue, 20 Sep, 2016 at 2:22 PM
PathSolutions does a query of dot1qTpFdbPort and gets the VLAN number and MAC address.
However, the HP ProCurve 2610 switches gets a VLAN-CREATED-OR...
Tue, 20 Sep, 2016 at 2:24 PM
Log into your Mitel Standard Linux System.
In Mitel, on the left hand side, choose “Configuration” and then click on SNMP. You can then Enable the servi...
Mon, 23 May, 2016 at 8:05 AM
Symbols like the “@” sign should not be used in SNMP community strings. This is due to some manufacturers’ devices using the “@” sign for special purposes...
Mon, 23 May, 2016 at 8:07 AM
See Command Below
snmp-server community community_string RO
Replace “community_string” with the desired SNMP community string for this ...
Tue, 20 Sep, 2016 at 2:26 PM
Refer to Cisco’s technote on this: http://www.cisco.com/en/US/tech/tk648/tk362/technologies_tech_note09186a00800948e6.shtml
It is not recommended to...
Tue, 20 Sep, 2016 at 2:27 PM
The service attempts to communicate with network devices via the SNMPv2c protocol. If a device fails to respond to the SNMPv2c queries, the service wil...
Tue, 20 Sep, 2016 at 2:28 PM
Configure your SNMP Service Properties on your Server. In the Security Tab select the “Accept SNMP packets from any host option”.
1.Go to Start | Contro...
Mon, 23 May, 2016 at 9:04 AM
Cisco ASA firewalls 4.2 & earlier have a maximum SNMP packet size of 512 bytes. As a result of this small packet size, many SNMP requests may be...
Tue, 20 Sep, 2016 at 2:33 PM