Misc

How to Clear Out History on a Device
 Stop the PathSolutions TotalView service  Browse into the C:\Program Files (x86)\PathSolutions\TotalView\Data directory with Windows file ex...
Wed, 30 Nov, 2016 at 1:32 PM
PathSolutions Load on the Network
PathSolutions sends out one 512 byte packet per network interface every 5 minutes. For example: When monitoring a 48 port switch, we will send 48 packets ...
Wed, 25 May, 2016 at 4:08 PM
High Error Rates on Interfaces seen using Cisco Devices
Interfaces that seem to show High Error Rates on Ports on Cisco Devices usually end up being “Deferred Transmissions” and “Outbound Discards”. The fol...
Wed, 30 Nov, 2016 at 1:35 PM
Device Not Being Monitored
The device must be configured to support SNMP v1 or preferably SNMP v2c. If the device is unable to support either of these protocols, then it cannot ...
Wed, 30 Nov, 2016 at 1:42 PM
Cisco Switch – GetBRIDGE
On Cisco switches, the GetBRIDGE program when run normally won’t show the complete bridge table. Cisco stores the bridge table using a different method, ...
Wed, 30 Nov, 2016 at 1:45 PM
Link Aggregate Ports
When you trunk two interfaces together, it creates a third virtual interface that is the “trunk interface”. This may also be called the “Link Aggregat...
Wed, 30 Nov, 2016 at 1:48 PM