Syslog Sends Back Different IP on Alerts
Modified on: Tue, 20 Sep, 2016 at 1:39 PM
If TotalView is monitoring a router via one IP address, yet the device sends back syslog messages with a different interface’s IP address, TotalView may not report the correct IP address on alerts. This can be fixed by entering the following command on the router:
logging source-interface <interface>
logging source-interface Fa0/2
This will have the router send syslog messages with the IP address that is assigned to Fa0/2.
Did you find it helpful?
Sorry we couldn't be helpful. Help us improve this article with your feedback.