Misc

Syslog Sends Back Different IP on Alerts
If TotalView is monitoring a router via one IP address, yet the device sends back syslog messages with a different interface’s IP address, TotalView may ...
Wed, 25 Jan, 2017 at 1:51 PM
Device Debug Red X
If a network device has problems being queried or has a thread crash (large red “X” in front of the device), you will want to create a device debug fi...
Wed, 25 Jan, 2017 at 1:53 PM
How to UnInstall TotalView
How to do a complete uninstall: Go to the control panel and choose Add/Remove Programs Select PathSolutions TotalView and choose “Uninstall” Aft...
Wed, 25 Jan, 2017 at 1:54 PM
Admin Rights for Totalview Installation
For the installation to complete normally, you need: In order to install software, you need local admin rights The installer will install one Windo...
Wed, 25 Jan, 2017 at 1:55 PM
Re-Directing Poll Failure Messages
Re-Directing Poll Failure Warning Messages If you don’t want the same person to receive the Poll Failure warning messages as the Daily Network Weather ...
Wed, 25 Jan, 2017 at 1:56 PM
Cisco Class Based QoS (CBQoS) Indexes Do Not Match
Cisco Class Based QoS (CBQoS) Indexes Do Not Match If TotalView is monitoring a Cisco router that has Class Based QoS configured, the internal SNMP ind...
Wed, 25 Jan, 2017 at 1:57 PM
WinHttpSendRequest Error
WinHttpSendRequest error If the Config Tool, or the QuickConfig Wizard pops up with WinHttpSendRequest error 12175 when it tries to do a license check-...
Wed, 25 Jan, 2017 at 1:58 PM
Moving Totalview to a new server
1)      Contact PathSolutions support (support@pathsolutions.com) to clear the MAC address for the license in the license server 2)      Install PathSo...
Wed, 25 Jan, 2017 at 2:01 PM
Emailed Template Report Options
For emailed reports, you can review the existing report templates in the C:\Program Files (x86)\PathSolutions\TotalView\MailTemplates directory and find a...
Thu, 2 Mar, 2017 at 1:52 PM
Monitoring Temperature for Device
In order to monitor the temperature of a device, the OID for the temperature of the device is needed. This OID would be entered into the OIDEntry.cfg fi...
Thu, 25 May, 2017 at 1:34 PM