Configuration
Refer to Cisco’s technote on this: http://www.cisco.com/en/US/tech/tk648/tk362/technologies_tech_note09186a00800948e6.shtml
It is not recommen...
Mon, 23 Jan, 2017 at 1:56 PM
The service attempts to communicate with network devices via the SNMPv2c protocol. If a device fails to respond to the SNMPv2c queries, the service will a...
Thu, 19 May, 2016 at 2:14 PM
The device must be configured to support SNMP v1 or preferably SNMP v2c. If the device is unable to support either of these protocols, then it cannot be ...
Mon, 23 Jan, 2017 at 2:02 PM
Alerts and the Daily Network Weather Report are all sent out via email. The system must have a valid connection to an SMTP mailserver or SMTP mail relay....
Mon, 23 Jan, 2017 at 2:05 PM
Cisco PIX firewalls can be configured to be monitored by PathSolutions.
The following configuration lines should be added to the PIX configuration:
sn...
Mon, 23 Jan, 2017 at 2:07 PM
The Quick Config wizard can be set to automatically scan for new devices on a regular basis. This is performed via Windows Scheduled Tasks, and running the...
Thu, 5 Dec, 2019 at 8:42 AM
Move your important PathSolutions files by going to:
C:\Program Files(86)\PathSolutions\TotalView
In your TotalView folder, copy the Data Folder,...
Mon, 23 Jan, 2017 at 2:09 PM
The “Update” link on web pages can be eliminated and this information can be automatically collected on a regular basis. There are two ways to accomplish...
Wed, 25 Jan, 2017 at 1:36 PM
ODBC data exports can be made via the Enterprise Module. The ODBC database connector should be configured to connect to the database and have INSERT capa...
Mon, 23 Jan, 2017 at 2:13 PM
Regedit
HKEY_LOCAL_MACHINE > SOFTWARE > Wow6432Node (PathSolutions is a 32 bit program) >NETLATENCY (deleting this folder will remove the remna...
Thu, 19 May, 2016 at 2:27 PM