Configuration

Syslog Sends Back Different IP on Alerts
If TotalView is monitoring a Cisco Router/Device via one IP address, yet the device sends back syslog messages with a different interface’s IP address, ...
Mon, 23 Jan, 2017 at 1:22 PM
Admin Rights for TotalView Installation
For the installation to complete normally, you need: In order to install software, you need local admin rights The installer will install one Wind...
Mon, 23 Jan, 2017 at 1:28 PM
Re-Directing Poll Failure Messages
Re-Directing Poll Failure Warning Messages If you don’t want the same person to receive the Poll Failure warning messages as the Daily Network Weather ...
Mon, 23 Jan, 2017 at 1:28 PM
Cisco Class Based QoS (CBQoS) Indexes Do Not Match
Cisco Class Based QoS (CBQoS) Indexes Do Not Match If TotalView is monitoring a Cisco router that has Class Based QoS configured, the internal SNMP ...
Mon, 23 Jan, 2017 at 1:29 PM
Device name shows as “none” on Devices tab
Device name shows as “none” on Devices tab This may happen if the device does not have a configured device name, or if the device does not support t...
Mon, 23 Jan, 2017 at 1:29 PM
Modifying Your Map Zoom Levels
To modify your Map Zoom Levels in your browser, go to C:\Program Files (x86)\PathSolutions\TotalView\js and open PathSolutions JScript Script File in Not...
Mon, 23 Jan, 2017 at 1:30 PM
Is TotalView safe to use on the Internet?
TotalView has been tested for buffer overflow errors from browsers to make sure that it is safe to use on Intranets, Extranets, and the Internet.  ...
Mon, 23 Jan, 2017 at 1:31 PM
TotalView User Passwords
The PathSolutions’ TotalView Passwords are sent in Base64 encoding. This provides simple encryption of passwords and accounts, and should only be used to ...
Mon, 29 Aug, 2022 at 7:36 AM
Ignoring Unknown Protocol Errors
Devices will increment the “Inbound Unknown Protocols” error counters on interfaces if strange protocols are received. This is typically when network adapt...
Mon, 23 Jan, 2017 at 1:38 PM
Some Switch manufacturers report anomalous errors on VLAN interfaces.
For some switch manufacturers, VLAN interfaces report anomalous errors. If you do not want the error rate of VLAN interfaces calculated, In the Config Tool...
Mon, 23 Jan, 2017 at 1:40 PM